Trying to align checks with printer. How do you do that?

I've got all the steps you need in aligning how your checks print, @dgranere-hotmail.

First, let's make sure the latest version of Adobe Acrobat Reader is installed. Then, follow these simple and quick easy steps to set up Print Checks:

1. Select the Plus icon on the Toolbar.
2. Under Vendors, choose Print Checks.
   
3. At the bottom of the page, select Print setup.
4. The window changes to Print checks setup. Choose No, continue setup at the bottom of the page. On the next screen, select No, continue setup.
5. Now you’re on Fine-tune alignment. Drag the grid inside the large square to the place where it appears on your printout. This lets QuickBooks figure out how to adjust the alignment.
6. Select View preview and print sample in the lower left and choose Print at the bottom.
7. After the sample is printed on plain paper, hold it up to the light against a check and see if the alignment is correct.
8. If you still need to do some fine tuning, close the sample and then go back to the grid to make adjustments, then print a fresh sample.
9. Select Finish Setup when your sample’s alignment looks correct.
10. Apply the following changes. Changes should apply to most printer versions – make changes for the options you see below.
    1. Page Scaling: set to None
    2. Auto-Rotate and Center must not be checked.
    3. Make sure that Choose Paper Source by PDF size is check.
    4. If you’re using Adobe Acrobat, these options are slightly different:
       1. Under Page Size & Handling
          • Select Actual Size
          • Select Choose paper source by PDF size
       2. Under Orientation
          • Select Auto portrait/landscape

To help you set up, adjust, and check the printing alignment for all sales forms, feel free to read these articles:

• Print Sales Forms
• Align How Your Checks Print

Visit me here again in the Community and keep me posted on your progress with this printing issue, I'm determined to help you succeed.

Hi @dgranere-hotmail,

Hope you’re doing great. I wanted to see how everything about aligning checks. Was it successful? Do you need any additional help or clarification? If you do, just let me know. I’d be happy to help you at any time.

Looking forward to your reply. Have a pleasant day ahead!