Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
@Rose-A did you see my previous posts in the chain?
I have specific procedures to follow for my invoicing and I use a third party source to calculate my actual payroll.
Is there ANY other way to get the time to post?
Hello there, burghardtmfg.
Allow me to join this thread and provide some insights about your issue with QuickBooks job costing.
Right now, you'll need to add an invoice to show the rates on your Job Profitability Detail report. In your case, since you'll need to follow specific invoice process and uses a third party provider for your payroll, I recommend contacting your payroll provider to check if they have other ways on how to get time post billed before it is imported in QuickBooks.
Let me know if there's anything else I can help you with, I'd be delighted to answer them for you.
Kudos for the Comparison!
I just started working with a new client using QB Premier Consultant 2019 with some squirrelly things...
- Doing job costing for Spec Houses AND Billable Jobs
- Some of billable jobs may span years, of course, spec houses will span years
- Spec house job costs lives on the Balance sheet, Billable Jobs probably on Income statement.
- Want to break down labor by the phases of the job, ie. Drywall Labor, Painting Labor, etc.
I'm a Pro Advisor, no apologies, I've not done Job Costing in QB, hoping to shorten the learning curve.
Hi there, @HorseDancer!
You can consider assigning a class to your jobs so you can break down each of its phases. I'll be happy to share a few insights and help you from there.
First off, class tracking allows you to consider each phase of your job costing as one category every time you enter and record your transactions.
Thus said, you can simply add classes from the Class field when creating and recording your transactions for your job costing.
Once completed and you're about to break down the labor of your job costing, you can pull up and customize your report by classes.
For your additional reference, I'll be including an article you can read to earn more about your job costing: Tracking Job Costs in QuickBooks Desktop.
As always, you can visit our Help Articles age for QuickBooks Desktop if in case you need to learn some "How do I" steps.
It'll be always my pleasure to help if you have any other concerns, I'd be delighted to answer them for you.
wow do I agree with you. We bought into the enterprise edition just because they told us we could not only age our invoices but we cold have reports print with the job costing and instead when we print a P&L it has all the costing information from our employees checks in income!!! AND if we get a payment and haven't created some sort of pseudo invoice, the payment siits in income tracker forever and never ends up in a report on income (they don't have a clear report on income I've had to construct mine by hand). I'm kind of disgusted at the time I've put in on this thing and the bad results even after reconciling every darn credit card, line of credit etc and buying t sheets, it's still off. where is my ledger!!!!
wow do I agree with you. We bought into the enterprise edition just because they told us we could not only age our invoices but we cold have reports print with the job costing and instead when we print a P&L it has all the costing information from our employees checks in income!!! AND if we get a payment and haven't created some sort of pseudo invoice, the payment siits in income tracker forever and never ends up in a report on income (they don't have a clear report on income I've had to construct mine by hand). I'm kind of disgusted at the time I've put in on this thing and the bad results even after reconciling every darn credit card, line of credit etc and buying t sheets, it's still off. where is my ledger
Ok good for that report but when you run a P&L, all those costs show up in Payroll liabilities and throw your actual income statement off. This is not a good database for service oriented contractors and we have paid for every single add on available from buying excel which should come with a database that exports reports!!! to t sheets that are supposed to track expenses per customer per job. My boss is now thinking of changing to QB online because he was told it would be easier to work in for service oriented companies with under 20 employees instead of enterprise which is what we were talked into since I do books remotely.
If tsheets are a non posting item, how did the expenses that are supposed to post to individual jobs end up in my payroll liabilities under each employee name? It created a huge amount of money in payroll liabilities and wonder how to get them out?
I appreciate the complete details of your concern, @Anonymous.
Let me provide you with details on how to ensure that job costing works on your end.
First, let's set up your account's preferences.
1. Go to the Edit menu.
2. Choose Preferences.
3. Select Accounting menu.
a. Under the Company Preferences tab, ensure to check the following tick boxes:
> Prompt to assign classes
> Use class tracking
b. Click Ok.
4. Go to Payroll & Employees menu.
a. Click the Company Preferences tab.
b. Mark the Job Costing, Class and Item tracking for paycheck expenses tick box.
c. Select whether to track by Entire Paycheck or Earnings Item.
d. Click Ok.
Once completed, let's ensure to set your additions, deductions or company contributions payroll items to Track Expenses by Job.
On the other hand, to see the jobs you tracked for payroll, you can run the job costing reports excluding the Job Cost by Job and Vendor and Job Cost by Vendor and Job Summary/Detail reports.
Also, you can generate the Profit and Loss by Job report to view all paychecks related to the jobs. Here's how:
Let me know if you have other questions. The Community and I are here to help.
So it mixes labor and payroll taxes together? No, that would not work for Govt contractors.
So employees cannot input their own timesheets? That won't work for Govt contractors either.
Hello there, @KP.
I want to ensure that you'll be able to get this job costing concern sorted out.
If you could please provide some more details about the actions that you've taken, I'd be happy to take a look at it and help you in achieving your goal. Meanwhile, to speak with our representatives, you may follow the contact procedure found in this link: QuickBooks Desktop Support Team.
Also, I've added here some resources that you can check out about handling job costing for your reference:
Please get back to me with additional information about the steps that you've tried. I'll be keeping an eye out to your response on this to make sure you're all set. Have a good one!
In order to get TRUE profitability on any job, you would need to include direct cost to each job AND allocate total indirect cost to each job as well, based on a "causal-beneficial" basis, meaning proportionate to a relevant factor, for example, Fringe benefits such as payroll taxes, health insurance, 401k, etc. is typically allocated as a % of total labor, OH is typically allocated among jobs based on direct labor dollars on each job as a percentage of total direct labor and G&A is typically allocated to total cost that is not G&A, so applies % rate on top of Direct, Fringe and OH cost. Then lastly should apply % fee which is actual profit rate on top of cost that is billed to customer. This will ensure you always cover TOTAL COST and make PROFIT as well.
When you only allocate direct job costs, that is like your kid saying he supports himself on his part-time deli job, not counting that he lives in your house where bills include mortgage, utilities, cable, internet, food, etc.
Hi kp,
You can include your total labor cost in the journal entry of your payroll expense. And mark it as billable to the job. I'll guide you through how it is done.
Once done, run the Job Profitability Summary report to see the transaction.
Feel free to read this article for more information: Tracking job costs in QuickBooks Desktop.
You might also want to check our page for future reference: Inventory and projects.
You can always leave a comment anytime if you need help with anything else.
We have struggled with this issue for a while. We need real job cost based on billable rates. Have you found a solution?
Hello there, @Kat24.
If you're using QuickBooks Online (QBO), this option isn't available as of the moment.
However, if you're using QuickBooks Desktop (QBDT), then, you can do this by following these steps:
Feel free to drop a comment below if you have any other questions. I'll be right here to help!
They are already hitting the GL through the payroll entry. We don’t use payroll through QB. We use a third party payroll company. I found a way to get the costs into the projects, however, while not hitting the GL.
Hello kp,
We are new to QuickBooks Enterprise Solutions - Manufacturing and Warehouse version. We are using TSheets and a third party company to do our payroll. It sounds like we are having the same problem that you were having. I can only get TSheets to transfer over hours by job, not dollars. The payroll company just gives me the gross salaries, time worked, taxes, and deductions - nothing broken out by jobs. We are having a problem in getting the direct labor to go in the various jobs. On most programs, you can see the hours and dollars posting together on the job. We have the details for hours, just not dollars to match unless I re-do the payroll with Excel and post it manually.
It sounds like you found a solution. Would you mind sharing that with me?
Thanks.
Thanks for joining this thread, @How2. Let me chime in to share a few insights about how Tsheets works in QuickBooks.
When Tsheets imports the time, it does not post to any account. Once you use this to an expense or payroll, that's the time you will see the dollars or amounts posted to the Chart of Accounts.
I'm also sharing our help article that might help you in the future. You can read through: Fix a paycheck with missing timesheet info. It gives you an idea about how to handle missing timesheet information of your employee's paycheck.
Don't hesitate to message us again if you have more questions. We're always happy to assist.
I don't use T-sheets, but an outside payroll service.
In my world (Govt contracts) require GAAP accrual-basis accounting for small biz as prerequisite for DCAA/FAR compliance including job costing Timesheet hours to flow to Customer Billings, Timekeeping and Payroll are separate functions but are both components of the same process.
3 Steps:
1) Timesheets are updated online daily by employees recording hours worked to jobs assigned.
2) QB missing link
3) Payroll (3rd party service) takes Gross Pay, deduct taxes and spits Net Pay as Direct Deposits.
Step 2 is Job Cost Accounting, where Timesheet hours by Job are converted to dollars to pay employees (at pay rate) and bill customers (at billing rates). For 30 years, QB can't do this yet, but I keep trying by sharing this info in forum, hoping one day to benefit small Govt contractors here.
Until then, I cannot recommend QB to any of them, so 90 less clients for QB, just from me.
Thanks for joining this conversation, teamchambie and Teri Wilt.
As shared by my colleague katherinejoyceO, timesheet hours won't affect any accounts in QuickBooks Desktop.
To make sure it'll reflect on the reports, you'll have to enter a journal entry and add the appropriate customers and jobs. I'll show you how:
In case you need tips and related articles in the future, visit our QuickBooks Community help website for reference: QBDT Self-help.
Please reach out to me if you need additional help or anything else. I'm always ready to assist. Have a good day.
You have clicked a link to a site outside of the QuickBooks or ProFile Communities. By clicking "Continue", you will leave the community and be taken to that site instead.
For more information visit our Security Center or to report suspicious websites you can contact us here