cancel
Showing results for 
Search instead for 
Did you mean: 
gtalovic
Level 1

Where do I change a contractor/vendor from 1099-MISC to 1099-NEC? The system knows the difference as it shows who is NEC and who is MISC on the "over threshold" report

Where do I change a contractor/vendor from 1099-MISC to 1099-NEC?
34 Comments 34
JasroV
QuickBooks Team

Where do I change a contractor/vendor from 1099-MISC to 1099-NEC? The system knows the difference as it shows who is NEC and who is MISC on the "over threshold" report

You can change your contractor or vendor to 1099-NEC when preparing their 1099, @gtalovic.

 

I’d be glad to guide you on how to achieve this in your QuickBooks Online (QBO) account. Here’s how:

 

  1. Go to the Workers or Payroll menu (Or select Expenses and then Vendors).
  2. Select the Contractors tab.
  3. Click Prepare 1099s and select Let’s get started.
  4. Ensure your company name, address, and tax ID is correct and matches the letters from the IRS.
  5. Select the Nonemployee compensation box represent the type of payments made to your contractor this year. 3.JPG
  6. Fill in the needed details and ensure the mapping of your 1099 is accurate.
  7. Once done, you're now ready to file your 1099 forms.

For more details about this, you can check out this article for reference (read Step 3: Create your 1099s in QuickBooks Online section): Create and file 1099s using QuickBooks Online.

 

To learn more about the difference between 1099-MISC and 1099-NEC, you can refer to the links below that provide the complete details:

In case you made some errors or mistake in filing your Forms, you can utilize this resource that can guide you on how to handle the situation seamlessly: Correct errors on Forms 1099-MISC.

 

You’re always welcome to get back to me if you have other queries about preparing your 1099. I’d be more than happy to work with you again. Keep safe and take care.

suzymassel17
Level 2

Where do I change a contractor/vendor from 1099-MISC to 1099-NEC? The system knows the difference as it shows who is NEC and who is MISC on the "over threshold" report

I have the same question, but for QB Desktop!

suzymassel17
Level 2

Where do I change a contractor/vendor from 1099-MISC to 1099-NEC? The system knows the difference as it shows who is NEC and who is MISC on the "over threshold" report

I have the same question, but for QB Desktop!

MaryLurleenM
Moderator

Where do I change a contractor/vendor from 1099-MISC to 1099-NEC? The system knows the difference as it shows who is NEC and who is MISC on the "over threshold" report

I got you covered, suzymassel17.

 

To achieve this in QuickBooks Desktop, we need to adjust your Chart of Accounts. This is to ensure accounts are set up on each form. By adding a new account to your chart of accounts, we can track the payment separately. Here's how: 

  1. Go to the Lists menu, then choose Chart of Accounts.
  2. Click the Account dropdown, then choose New to create a new account.
  3. Choose an account type of Expense, Other Expense, or COGS, then click Continue.
  4. Enter the Account Name and details such as DescriptionNote, and Tax-line Mapping.
  5. Select Save & Close.

You can follow the same process for each new account to report on the 1099-NEC.

 

Then, we need to add a journal entry to move the amounts to the new account. For more details, you can check out Step 4: Move the payments to the new account outlined in this article: How to modify your chart of accounts for your 1099-MISC and 1099-NEC filing.

 

Lastly, I recommend visiting the links below to help you in preparing your company and tax forms for the upcoming 2020 tax season:

I'll be here if you have additional questions.

suzymassel17
Level 2

Where do I change a contractor/vendor from 1099-MISC to 1099-NEC? The system knows the difference as it shows who is NEC and who is MISC on the "over threshold" report

I am curious why I cannot just Edit my Account?  Why do I have to make a new Account?  My Account is for Independent Contractors.  Why can't I just Edit that account? 

suzymassel17
Level 2

Where do I change a contractor/vendor from 1099-MISC to 1099-NEC? The system knows the difference as it shows who is NEC and who is MISC on the "over threshold" report

How do I make sure the new Account will be reported on the 1099 NEC?  Why can't I just Edit the Account I need to report on the 1099 NEC?  

CharleneMaeF
QuickBooks Team

Where do I change a contractor/vendor from 1099-MISC to 1099-NEC? The system knows the difference as it shows who is NEC and who is MISC on the "over threshold" report

Thanks for getting back to us, suzymassel17.

 

The 1099 NEC and 1099 MISC should be mapped into separate accounts so they won't mix up in the tax forms.  The IRS separates the non-employee compensation into a new form. We'll have to track the transactions separately by creating a new account.

 

I recommend following the steps outlined by my colleague to create a new 1099-NEC account, then move the payments to the account to ensure they'll be reported.

 

For more information about 1099 forms and how to file them, I suggest checking this article: What is a 1099 and do I Need to File One?.

 

Additionally, 

I'm adding these articles for further details about the 1099-NEC FAQ and various updates in QBDT. 

 

 

Let me know if you have other questions about 1099. I'm here to assist you.

BethJep
Level 1

Where do I change a contractor/vendor from 1099-MISC to 1099-NEC? The system knows the difference as it shows who is NEC and who is MISC on the "over threshold" report

What if we only send out 1099 NEC's?  We don't need both misc and nec.  Can't we just make a simple change for that?  Instead of creating new accounts etc.?

ZackE
Moderator

Where do I change a contractor/vendor from 1099-MISC to 1099-NEC? The system knows the difference as it shows who is NEC and who is MISC on the "over threshold" report

Welcome to the Community, BethJep.
 

If you paid anyone $600 or more, you're required by U.S. tax law to file a 1099-MISC form. Payments found on these forms are geared towards vendors, attorneys, and other individuals who aren't proper contractors.


Since you only need to generate 1099-NEC forms, you'll want to access your Categorize payments to contractors screen and confirm all of the appropriate checkboxes are selected.
 

Here's how:

  1. In your left navigation bar, go to Payroll, then Contractors.
  2. Click Prepare 1099s.
  3. Hit Let's get started.
  4. Make sure the company name, address, and tax ID are correct.
  5. Tick all of your relevant checkboxes for each type of payment you've made.
  6. Enter any other necessary information to ensure the proper mapping of your forms.


Once you're finished, you'll be able to find a few useful articles about creating/filing, understanding payment categories, and correcting errors on forms in JasroV's post. Our help article archives also have many extensive resources that may come in handy moving forward.
 

Please feel more than welcome in sending a reply if there's any additional questions. Have a wonderful day!

BethJep
Level 1

Where do I change a contractor/vendor from 1099-MISC to 1099-NEC? The system knows the difference as it shows who is NEC and who is MISC on the "over threshold" report

We don't use the Payroll option though.   Is there another way?

Tori B
QuickBooks Team

Where do I change a contractor/vendor from 1099-MISC to 1099-NEC? The system knows the difference as it shows who is NEC and who is MISC on the "over threshold" report

Good morning, @BethJep

 

Thanks for following up with us. I'm happy to lend a helping hand with filing your 1099s without a payroll service. 

 

If you don’t have payroll, you can use the standalone 1099 e-file service to file the 1099-NEC with the IRS. You'll only need to ensure you've added your contractor and payment information to create and e-file 1099s. Then, once they're completed, you can email them or print and mail them. I've included the steps to do this below. 

 

  1. From the 1099 E-File Service page, log in to your or sign up for your account.
  2. Hit Enter information.
  3. Enter your company information, then tap Continue.
  4. Type in your tax information, then click OK.
  5. Enter your contractor information and values for the supported boxes, then select OK.
  6. Review your 1099 forms. Hit Add to continue adding more contractors, Edit to make any changes, or Continue to proceed to the next step.
  7. On the Pay for Service window, enter your credit card information and tap Approve to pay for the service.
  8. Select the Print For Contractors or Print for your records buttons to view and print 1099 forms.
  9. Place a checkmark next to contractors paid in prior years you also wish to create 1099s for. Click on Continue.
  10. If you are ready to e-file, select Submit final forms.

That's all there is to it! Check out Create and file 1099s using Intuit Online Payroll or no payroll for more details.

 

Please let me know if you have additional questions or concerns. I'll be here every step of the way. You can reach out to the Community or me at any time. Take care and have a great week! 

 

 

 

 

AngelaGoodner
Level 1

Where do I change a contractor/vendor from 1099-MISC to 1099-NEC? The system knows the difference as it shows who is NEC and who is MISC on the "over threshold" report

I don't have those options in my QBO account.  All my 1099s need to be NEC this year, and the e-file program is automatically putting them all in MISC without any input from me.  How do I set up this expense type to be seen as reporting to NEC?

MaryLandT
Moderator

Where do I change a contractor/vendor from 1099-MISC to 1099-NEC? The system knows the difference as it shows who is NEC and who is MISC on the "over threshold" report

Allow me to provide the steps so you can file 1099-NEC forms, AngelaGoodner.

 

You need to modify the Chart of Accounts to ensure those contractors' payments are tracked correctly for the form to use. Let me guide you through the steps:

 

Step 1: Create a 1099 Transaction Detail Report to identify the amounts paid and to which accounts.

 

  1. Go to Reports.
  2. Search for the 1099 Transaction Detail Report.
  3. Run the report and verify the amounts are showing in the correct accounts for the 1099-NEC and 1099-MISC. This will allow you to map the accounts as you go through the 1099 process.

You can also use the 1099 Contractor Balance Detail or 1099 Contractor Balance Summary reports if either of them adds more information.

 

Step 2: Add a new account to track separate payments.

 

  1. Go to Settings ⚙, then select Chart of Accounts.
  2. Click New.
  3. From the Account Type ▼ drop-down menu, select the type of account, Expense, Other Expense, or COGS.
  4. From the Detail Type ▼ drop-down, choose the one the fits the transactions
  5. Give your new account a name. 
  6. Add a description.
  7. Click Save and Close.
  8. Repeat this process for each new account to be reported on the 1099-NEC or 1099-MISC.

Once done, you can follow Step 3 and 4 through this article: How to modify your chart of accounts for your 1099-MISC and 1099-NEC filing. Then, choose QuickBooks Online for instructions and detailed steps.

 

Once these steps are completed, you are ready to begin filing your 1099-MISC and 1099-NEC forms.

 

If you're done mapping the accounts and 1099-NEC is still not generating, I recommend contacting our Live Support Team. They can verify the set up of your accounts and track payments correctly.

 

Stay in touch with me if there's anything else you need while preparing your 1099s. I'll be right here to help you if you need anything else concerning payroll.

eemahaffey
Level 3

Where do I change a contractor/vendor from 1099-MISC to 1099-NEC? The system knows the difference as it shows who is NEC and who is MISC on the "over threshold" report

For Step number 5 below, how can that be edited if you have already clicked Next? I chose the 1099 form for NEC and Rent, but forgot to also choose 1099 MISC and now need to add it. 

THank you!

JasroV
QuickBooks Team

Where do I change a contractor/vendor from 1099-MISC to 1099-NEC? The system knows the difference as it shows who is NEC and who is MISC on the "over threshold" report

Great to have you joined this thread, @eemahaffey.

 

I'd be delighted to help you prepare and file your 1099s in QuickBooks Online (QBO).

 

You'll want to click the Back button to start from the beginning. This way, you'll be able to add your 1099-MISC and continue with the process. I've added a screenshot below for your visual reference. 2.PNG

 

If the option isn't visible on your end, I suggest logging out and logging back in to your account to refresh the system. Then, prepare your 1099s again

 

Once done, you might want to check out this link that provides details on how to print your 1099: Print your 1099 forms.

 

I'll be around whenever you need help with your 1099s or with QuickBooks. Just add the details in your response and I'll get back to you as soon as possible. Keep safe!

eemahaffey
Level 3

Where do I change a contractor/vendor from 1099-MISC to 1099-NEC? The system knows the difference as it shows who is NEC and who is MISC on the "over threshold" report

Thank you very much for the quick response. Logging out and back in solved the problem for me. I reallly appreciate the suggestion!

Have a great day,

MonicaM3
Moderator

Where do I change a contractor/vendor from 1099-MISC to 1099-NEC? The system knows the difference as it shows who is NEC and who is MISC on the "over threshold" report

That's great to hear @eemahaffey.

 

Thank you for taking the time to circle back and let us know this worked for you.

 

Please don't hesitate to reach out if we can be of any help in the future. The Community is here for you any time.

 

Enjoy your day!

eehargis
Level 1

Where do I change a contractor/vendor from 1099-MISC to 1099-NEC? The system knows the difference as it shows who is NEC and who is MISC on the "over threshold" report

My QB is printing only two forms to a page and the only 1099-NEC forms I can find are three to a page. Is there a box I need to click. Last year they were all MISC vendors...

JoesemM
Moderator

Where do I change a contractor/vendor from 1099-MISC to 1099-NEC? The system knows the difference as it shows who is NEC and who is MISC on the "over threshold" report

Thank you for posting here in the Community. I can provide steps about printing 1099s, @eehargis.

 

You'll have to run as the administrator in QuickBooks Desktop and update the file to the latest release. To confirm which release you have, press the F2 button when logged in to QuickBooks. This opens the Product Information screen. Look at the release version extension. It'll be the underscore and a number:

 

  • QB 2022 R3_(71+)
  • QB 2021 R8_(62+)
  • QB 2020 R13_(39+)
  • QB 2019 R16_(55+) 

 

If your product release and version are lower than those listed, you’ll need to update your QuickBooks. Let me show you how:

 

  1. Go to the Help menu and click Update QuickBooks Desktop.
  2. Select the Options tab and click Mark All, then Save.
  3. Click on the Update Now tab.
  4. Make sure Critical Fixes are checked.
  5. Click on Get Updates.

 

You need to close and reopen your QuickBooks account when the update is finished. Once done, click Yes to install the updates, then restart your computer.

 

If you're using QuickBooks Online, you'll have to buy the pre-printed forms that are compatible with QuickBooks to avoid any error. From there, you can now print the 3-page form of 1099. You can get a compatible pre-printed kit from this link: https://www.intuitmarket.intuit.com/tax-forms/1099-forms.

 

Also, you can manually align the form and choose three (3) horizontal then zero (0) vertical to be able to print the form. 

 

Here's a reference on how to print your 1099s and provide copies to your contractors: Print your 1099 forms.

 

You'll want to know how to access and print your other tax forms to save a copy for future use. Please refer to this article for the detailed steps: View and print payroll tax forms.

 

Click the Reply button anytime you have additional questions about the process or printing forms in QuickBooks. Have a great day ahead, @eehargis.

eehargis
Level 1

Where do I change a contractor/vendor from 1099-MISC to 1099-NEC? The system knows the difference as it shows who is NEC and who is MISC on the "over threshold" report

QB is still only printing two to a page when the IRS 1099-NEC forms are three to a page, even after the updates were done, everything was shut down and the computer was restarted. I also tried the alignment on the printer set up. The sample came out perfectly but the actual 1099-NEC forms are still coming out two to a page, even after restarting the computer and then restarting QB.
 
I ended up printing the pdf fillable form on the IRS website. The red forms will have to be filled out by hand . The 1096 printed without a problem..
 
 
eehargis
Level 1

Where do I change a contractor/vendor from 1099-MISC to 1099-NEC? The system knows the difference as it shows who is NEC and who is MISC on the "over threshold" report

QB is still only printing two to a page when the IRS 1099-NEC forms are three to a page, even after the updates were done, everything was shut down and restarted. When I tried the alignment suggestion, the sample printed perfectly but the actual 1099 forms with live data still prints two to a page, and after the computer was shut down and  restarted again.  
 
I ended up printing the pdf fillable form on the IRS website. The red forms will have to be filled out by hand . The 1096 printed without a problem..
 
To say I am frustrated and disappointed in QB is a great understatement
eehargis
Level 1

Where do I change a contractor/vendor from 1099-MISC to 1099-NEC? The system knows the difference as it shows who is NEC and who is MISC on the "over threshold" report

QB is still only printing two to a page when the IRS 1099-NEC forms are three to a page, even after the updates were done, the computer was restarted. The sample page printed perfectly when I tried the realignment suggestion; the actual live data still prints two to a page even after all the restarting.
 
I ended up printing the pdf fillable form on the IRS website. The red forms will have to be filled out by hand . The 1096 printed without a problem..
 
To say I am disappointed and  frustrated with all the wasted time is an understatement.
 
 
MaryLandT
Moderator

Where do I change a contractor/vendor from 1099-MISC to 1099-NEC? The system knows the difference as it shows who is NEC and who is MISC on the "over threshold" report

I understand the frustration and disappointments that you've been through, eehargis.

 

Allow me to help and provide one more step so you can print 3-part 1099s. You can run QuickBooks as an Administrator go to the 1099 Wizard and print Form 1099-NEC.

 

If you're still unable to do so, I recommend contacting our QuickBooks Desktop Live Team. 

 

By doing so, they can check your company file and ensure you don't miss any of the updates for the print 3-part 1099s. They'll also do screen sharing with you and guide you through the process.

 

Please follow the steps I've outlined below.

 

  1. Open QuickBooks.
  2. Go to Help, then select QuickBooks Desktop Help.
  3. Select Contact Us.
  4. Enter your concern, then select Continue.
  5. Choose a way to connect with us:
    • Start messaging with a support expert.
    • Get a callback from an expert (availability may be limited).

 

You can also call them through this link: Contact Payroll Support. Then, proceed to QuickBooks Desktop Payroll for the phone number.

 

Please get back to me if for updates about your printing 1099 concerns. I'm always right here to guide you.

eehargis
Level 1

Where do I change a contractor/vendor from 1099-MISC to 1099-NEC? The system knows the difference as it shows who is NEC and who is MISC on the "over threshold" report

How do I get to the 1099 wizard? I am the only person using QB so I am the administrator.

Need to get in touch?

Contact us